Ask Equipolarcar the delivery time

Reverse Camera Interface Porsche PCM3.1 Panamera Cayenne Cayman Boxster Macan

€399.00

Tax included

Ref: CSRLPCM3TF

This interface allows you to connect a reverse camera to your factory navigation system. Once installed, the video from the factory TV tuner can be viewed whilst the car is in motion instead of only when stationary.

Quantity

Ask Equipolarcar the delivery time

Ask about product

r.LiNK Interface RL-PCM3-TF

This interface allows you to connect a reverse camera to your factory navigation system. Once installed, the video from the factory TV tuner can be viewed whilst the car is in motion instead of only when stationary. Internal DVD player cannot be watched

Product features
Plug & Play interface
Integrated into the vehicle infotainment
Rear view camera input
Rear view camera power cable (+12V max. 400mA)
Video in motion
Automatic switching to rear-view camera input
Optionally coding of Park Assistant to retrofit factory PDC

Navigation system
Porsche PCM 3.1

Car compatibility
Porsche Cayenne (92A) 2010 → 2016
Porsche Panamera (971) 2009 → 2016
Porsche 991 (991) 2012 → 2016 (software 4.5 and above)
Porsche Boxster (981) 2012 → 2016 (software 4.5 and above)
Porsche Cayman (981) 2012 → 2016 (software 4.5 and above)
Porsche Macan (95B) 2014 → 2016 (software 4.5 and above)

Important notice
Only suitable for PCM 3.1 (with navigation)
Not suitable for CDR-31 (without navigation)

To identify which version of software your PCM3.1 has, follow the buton selection below on the PCM
Select INFO
Touch OPTION
Touch SYSTEM VERSION

Coding of the backup camera function
Turn on ignition
Wait until the head-unit has booted
Press and hold steering-wheel button HASH KEY/MODE
Press and hold steering-wheel button ACCEPT (observe the sequence!)
Hold both buttons. During configuration the red and blue LED are blinking short inside the CAN-box (visible at the male 8pin Molex connector). The PCM makes a reset after 5-10 sec.
Disengage both steering-wheel buttons
The red and the blue LED inside the CAN-Box are glowing and the menu Rear-view camera appears in the menu OPTION after a successful coding

To ensure compatibility, we recommend that the parts pictured in our listing are compared to the actual parts in your vehicle before you make your purchase. If still unsure please contact us via email system so we can advise before you make your purchase.