Ampire BTR200X A2DP Bluetooth Music Module Jack

FEATURES
Marine certified
With auto turn on function
Certified Bluetooth 4.0 CSR8645
3.5mm jack output with 1.0V Signal output
QDL licensed
SSID Name: BTR200X
aptX Audio-Codec von Qualcomm®
Bitrate: up to 345 kBit/s

CONNECTIONS
Blue: Remote out wire +12V/20mA
Red: +12V ignition (ACC) Fuse 2A
Black: GND
3.5mm jack 

BLUETOOTH LICENSE
Declaration ID D025151
Referenced Qualified Design ID 56386
Listing Date 08 December 2014

PAIRING
Ensure that your streaming device has Bluetooth enabled
Turn the ignition (ACC) on
The LED (6) starts blinking (pairing mode)
Select BTR200X in your devices Bluetooth setup menu
When successfully connected, the LED on the BTR200X will stop blinking and remain lit. A single beep will be heard through the connected sound system

ATTENTION
Multiple devices can be paired to the BTR200X, but only one device can connect at one time
The BTR200X will remember the last device which was connected to it and reconnect with it automatically. If that device is not active, then other paired devices can connect manually, or new devices can be paired
When a connected device is out of range for more than one minute, the BTR200X will automatically disconnect it and returns to pairing mode [the LED (6) starts blinking]

OPERATING
Once connected, audio is controlled from the streaming device. This includes volume and media selection
The BTR200X can be installed out of sight, as it has no user controls that needs to be accessed

Installation Manual

To ensure compatibility, we recommend that the parts pictured in our listing are compared to the actual parts in your vehicle before you make your purchase. If still unsure please contact us via email system so we can advise before you make your purchase.